Electrical Panel Upgrades in Dallas, OR

Wire Smart Inc. installs and upgrades electrical panels in Dallas, OR — west of Salem in Polk County. We replace outdated 60A and 100A panels with modern 100A, 200A, or 400A service for Dallas homes and businesses, including FPE and Zinsco replacements, generator-ready upgrades, and EV-ready panels throughout Polk County. In Dallas (97338), most homes and businesses are served by Pacific Power (PacifiCorp) serves the City of Dallas and most of Polk County. We pull permits through the Polk County (acting for the state) handles electrical permits and inspections in the Dallas area; we pull the permit and coordinate the inspection. and regularly work in Downtown Dallas, Oakdale Heights, LaCreole, and surrounding Polk County areas.

Call 503-383-1602 Request an Estimate View Services

Quick Answers

Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.

Who: Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) serving Dallas and Polk County for 25+ years.
What: Replace outdated 60A/100A panels with 200A service; FPE (Federal Pacific) and Zinsco panel replacements; Subpanels for shops, ADUs, and additions; Generator-ready and EV-ready panel upgrades; Failed breaker and bus-bar repair; Permit pulling and final inspection coordination
Where: Dallas, OR (97338) — including Downtown Dallas, Oakdale Heights, LaCreole — and surrounding Polk County communities.
How much: Free on-site estimate. Most residential 200A upgrades land in the $2,500–$4,500 range; final pricing depends on panel size, mast/meter work, and utility coordination.
When: Typically scheduled within 3–7 business days for Dallas (about 20–25 minutes from our Salem shop), often sooner for urgent calls during business hours.

What We Do

Replace outdated 60A/100A panels with 200A service
FPE (Federal Pacific) and Zinsco panel replacements
Subpanels for shops, ADUs, and additions
Generator-ready and EV-ready panel upgrades
Failed breaker and bus-bar repair
Permit pulling and final inspection coordination

Common Reasons Customers Call Us

Frequent breaker trips in a Dallas home
Burning smell, scorch marks, or rust at the panel
Outdated/recalled brand (Federal Pacific, Zinsco, Pushmatic)
Adding a generator, hot tub, EV charger, or shop
Insurance carrier or home sale flagged the panel

Our Process

Step 1
Free site visit — load calculation, age, and code review.
Step 2
Permit pull and PGE / utility coordination.
Step 3
Installation in a single day with limited power downtime.
Step 4
Final inspection and labeled walk-through.

Why Work With Wire Smart Inc.

Local Dallas-area service from a Salem-based contractor — about 20–25 minutes away
Familiar with Pacific Power (PacifiCorp) serves the City of Dallas and most of Polk County service standards and Polk County permitting
Oregon CCB #215974 · BCD #C1787 — licensed and insured
Permit pulling and inspection coordination
25+ years of residential and commercial experience

Serving Dallas, OR

We're roughly 20–25 minutes from our Salem shop to Dallas — close enough for same-week scheduling and prompt service calls. We're frequently in Dallas around the Polk County Courthouse and along E Ellendale Ave / Hwy 223.

Electric Utility: Pacific Power (PacifiCorp) serves the City of Dallas and most of Polk County.
Permits & Inspections: Polk County (acting for the state) handles electrical permits and inspections in the Dallas area; we pull the permit and coordinate the inspection.
ZIP Codes Served: 97338
Neighborhoods & Nearby Areas: Downtown Dallas · Oakdale Heights · LaCreole · Roger Jordan area · Kings Valley Hwy corridor

Get Electrical Panel Upgrades in Your Area

Wire Smart Inc. offers electrical panel upgrades across the Salem metro and Willamette Valley. Pick the closest area below for local utility, permit, and ZIP-specific details.

Cities We Serve

Salem Neighborhoods

Helpful Guides

Cost ranges, code requirements, and decision guides written for Salem-area homeowners.

Frequently Asked Questions

Which electric utility serves Dallas, OR?

Pacific Power (PacifiCorp) serves the City of Dallas and most of Polk County. Knowing the serving utility matters for meter-base work, service upgrades, and any disconnect/reconnect coordination — we handle that scheduling with the utility for you.

Who pulls the electrical permit for Dallas jobs?

Polk County (acting for the state) handles electrical permits and inspections in the Dallas area; we pull the permit and coordinate the inspection. Permit and inspection fees are itemized in your written estimate before any work begins.

Which ZIP codes and neighborhoods do you cover in Dallas?

We serve 97338 and work regularly in Downtown Dallas, Oakdale Heights, LaCreole, Roger Jordan area, Kings Valley Hwy corridor. Our shop is in Salem — about 20–25 minutes from Dallas — which lets us schedule Dallas jobs the same week in most cases.

How much does a panel upgrade cost in Dallas, OR?

Most Dallas-area 200A residential panel upgrades fall between $2,500 and $4,500, with meter-base or mast work and longer service runs adding cost. We provide a written estimate after a site visit.

Do panel upgrades need a permit in Dallas?

Yes. Oregon BCD requires an electrical permit and inspection for panel work. Wire Smart pulls the permit and coordinates the inspection.

How long does the power need to be off?

Most residential panel swaps take a single day with the home's power off for several hours during the cutover.

Can the new panel support a generator and EV charger?

Yes. We commonly size 200A or 400A panels with generator interlocks/transfer switches and dedicated 240V EV circuits in mind.

Related Services

Customers who book electrical panel upgrades often need these adjacent services on the same job.

Request an Estimate

Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.

Call 503-383-1602 Request an Estimate View Services

Back to homepage · Browse all services · Get a free estimate