Electrical Panel Upgrades in Salem, OR — 200A & 400A Service
Wire Smart Inc. is a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) that upgrades outdated 60A and 100A panels to modern 200A or 400A service across Salem, Keizer, Dallas, Monmouth, Independence, Silverton, Stayton, and the rest of the Willamette Valley. We pull the City of Salem electrical permit, coordinate the PGE disconnect, and complete most residential panel swaps in a single day with the home down for only 4–8 hours. Pricing for a standard 100-to-200A upgrade starts at $2,500.
Quick Answers
Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.
- Who
- Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) with 25+ years of experience.
- What
- Replacing outdated 60A/100A panels with modern 100A, 200A, or 400A panels — including subpanels, generator-ready and EV-ready upgrades, and FPE/Zinsco replacements.
- Where
- Salem, Keizer, Dallas, Monmouth, Independence, Silverton, Stayton, Turner, and the rest of Marion County, Polk County, and the Willamette Valley.
- How much
- Free on-site estimate. Most residential 200A upgrades in the Salem area land in the $2,500–$4,500 range; final pricing depends on panel size, mast/meter work, and utility coordination.
- When
- Most residential panel upgrades complete in a single day with several hours of power off; typically scheduled within 3–7 business days, often sooner.
Typical Panel Upgrade Pricing in Salem, OR
Real-world ranges from recent Salem-area jobs. Every project gets a written, itemized estimate before work starts.
| Scope | Typical Range | Notes |
|---|---|---|
| 100A → 200A swap (existing meter base) | $2,500 – $3,800 | Most common Salem residential upgrade |
| 200A upgrade + new meter base / mast | $3,800 – $4,800 | Weatherhead or service entrance also replaced |
| Service relocation or exterior re-route | $4,800 – $6,500 | Panel moved, conduit re-runs, PGE coordination |
| 400A residential service | $6,500 – $9,500 | Heat pump + EV + shop / ADU load profiles |
| Sub-panel for shop or ADU | $1,400 – $2,800 | Detached or attached, run length dependent |
| Federal Pacific / Zinsco replacement | $2,800 – $4,500 | Includes circuit relabeling and inspection |
Ranges are 2026 Salem-area pricing for typical single-family work. Quotes always include the Oregon BCD permit, PGE coordination, and final inspection — never as add-ons.
What We Do
- Replace outdated or unsafe electrical panels
- Upgrade panel capacity (100A, 200A, 400A) for modern loads
- Add subpanels for shops, ADUs, and additions
- Install panels ready for generators and EV chargers
- Repair or replace failing breakers and bus bars
- Pull permits and coordinate inspection
Common Reasons Customers Call Us
- Frequent breaker trips or burning smell at the panel
- Outdated or recalled panel brand (FPE, Zinsco, etc.)
- Adding a generator, hot tub, EV charger, or shop
- Whole-home remodel or addition
- Insurance or home sale requires panel update
Our Process
- Step 1Free estimate — site visit to assess load, age, and code requirements.
- Step 2Permit pull and utility coordination with PGE or your local provider.
- Step 3Scheduled installation with minimal power downtime.
- Step 4Final inspection and walk-through with the property owner.
Why Work With Wire Smart Inc.
- Salem-based residential and commercial electricians
- Permit and inspection handling included
- Clean installs with labeled circuits
- Generator and EV-ready upgrade options
Get Electrical Panel Upgrades in Your Area
Wire Smart Inc. offers electrical panel upgrades across the Salem metro and Willamette Valley. Pick the closest area below for local utility, permit, and ZIP-specific details.
Cities We Serve
Salem Neighborhoods
- Panel Upgrades in South Salem, Salem
- Panel Upgrades in West Salem, Salem
- Panel Upgrades in North Salem, Salem
- Panel Upgrades in Northeast Salem, Salem
- Panel Upgrades in Four Corners, Salem
- Panel Upgrades in Northgate, Salem
- Panel Upgrades in Sunnyslope, Salem
- Panel Upgrades in Morningside, Salem
- Panel Upgrades in Englewood, Salem
- Panel Upgrades in Faye Wright, Salem
Helpful Guides
Cost ranges, code requirements, and decision guides written for Salem-area homeowners.
Frequently Asked Questions
How much does a panel upgrade cost in Salem, OR?
Most Salem 100-to-200A upgrades fall between $2,500 and $3,800; jobs that require a new meter base, mast replacement, or service relocation typically land in the $3,800–$6,000 range. 400A services run $6,500–$9,500.
How do I know if my electrical panel needs to be replaced?
Common signs include frequent breaker trips, scorch marks or rust at the panel, an outdated or recalled brand (such as FPE or Zinsco), or insufficient capacity for new loads. We can inspect your panel and recommend whether a repair, subpanel, or full replacement is appropriate.
Can Wire Smart upgrade an older electrical panel?
Yes. We replace older 60A, 100A, and obsolete-brand panels with modern 100A, 200A, or 400A panels sized for your home or business.
Do panel upgrades require permits in Salem, Oregon?
Yes. Panel upgrades require an Oregon BCD electrical permit and a final inspection. Wire Smart pulls the permit and coordinates the City of Salem inspection for you.
How long is the power off during a panel upgrade?
On a typical residential swap the home's power is off for 4–8 hours during the cutover. We coordinate the temporary disconnect with PGE so the outage window is as tight as possible.
Can a panel upgrade support a generator, shop, EV charger, or new circuits?
Yes. We frequently upgrade panels specifically to support generators, transfer switches, ADUs, shops, EV chargers, and remodel circuits.
Should I go with 200A or 400A service in Salem?
200A is the standard for modern Salem single-family homes. 400A makes sense when you're combining heat pump + EV + shop/ADU, or running multiple Level-2 EV chargers. We run a load calculation as part of the estimate so the panel is sized to your real future loads.
Related Services
Customers who book electrical panel upgrades often need these adjacent services on the same job.
Request an Estimate
Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.
Back to homepage · Browse all services · Get a free estimate