Sub-Panel Installation in Northeast Salem, Salem, OR
Wire Smart Inc. provides sub-panel installation for Northeast Salem, one of Salem's established neighborhoods. We work along Lancaster Dr NE, Silverton Rd NE, Sunnyview Rd, and into the Lansing neighborhood. In Northeast Salem (97301, 97305), most properties are served by Portland General Electric (PGE) is the primary utility for Northeast Salem. Inside Salem city limits, electrical permits are issued by the City of Salem Permit Application Center; we pull the permit and schedule the inspection.
Quick Answers
Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.
- Who
- Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) — local to Northeast Salem for 25+ years.
- What
- 60A, 100A, 125A, and 200A sub-panels; Detached shop, garage, ADU, and addition feeders; Conduit-fed and direct-burial 4-wire feeders; Load calculations to confirm main-panel capacity; Grounding electrode systems at detached structures; Permit pulling and inspection coordination
- Where
- Northeast Salem, Salem OR (97301, 97305) — including Lansing, Northgate, Four Corners (adjacent).
- How much
- Free estimate. Most 60A–100A sub-panel installs run $1,400–$3,500 installed depending on feeder length, trenching, and whether the main panel has spare capacity; longer runs and 125A/200A sub-panels are bid by scope.
- When
- Most Salem neighborhood jobs are scheduled within 3–5 business days; same-day for urgent calls during business hours.
What We Do
- 60A, 100A, 125A, and 200A sub-panels
- Detached shop, garage, ADU, and addition feeders
- Conduit-fed and direct-burial 4-wire feeders
- Load calculations to confirm main-panel capacity
- Grounding electrode systems at detached structures
- Permit pulling and inspection coordination
Common Reasons Customers Call Us
- Building a new shop or detached garage in Northeast Salem
- Wiring an ADU, casita, or backyard cottage
- Basement remodel needing its own panel
- Adding a workshop with multiple 240V tools
- Main panel out of breaker space for new circuits
Our Process
- Step 1On-site visit — feeder route, load calc, panel location.
- Step 2Written estimate covering feeder, panel, and any trenching.
- Step 3Trench / conduit / cable, set and bond the panel.
- Step 4Test, label, and coordinate inspection.
Why Work With Wire Smart Inc.
- Local Northeast Salem (Salem) service from a Salem-based contractor
- Familiar with Portland General Electric (PGE) is the primary utility for Northeast Salem service standards and City of Salem permitting
- Oregon CCB #215974 · BCD #C1787 — licensed and insured
- Permit pulling and City of Salem inspection coordination
- 25+ years of residential and commercial experience in Salem
Serving Northeast Salem, Salem, OR
We're roughly 10–20 minutes from our Salem shop to Northeast Salem, Salem — close enough for same-week scheduling and prompt service calls. We work along Lancaster Dr NE, Silverton Rd NE, Sunnyview Rd, and into the Lansing neighborhood.
- Electric Utility
- Portland General Electric (PGE) is the primary utility for Northeast Salem.
- Permits & Inspections
- Inside Salem city limits, electrical permits are issued by the City of Salem Permit Application Center; we pull the permit and schedule the inspection.
- ZIP Codes Served
- 97301, 97305
- Neighborhoods & Nearby Areas
- Lansing · Northgate · Four Corners (adjacent)
Areas We Serve
We serve Salem, Keizer, Dallas, Monmouth, Independence, Silverton, Stayton, Turner, and surrounding areas in Marion County, Polk County, and the Willamette Valley.
Frequently Asked Questions
Which electric utility serves Northeast Salem in Salem?
Portland General Electric (PGE) is the primary utility for Northeast Salem. Knowing the serving utility matters for meter-base work, service upgrades, and any disconnect/reconnect — we coordinate that with the utility for you.
Who issues electrical permits for Northeast Salem?
Inside Salem city limits, electrical permits are issued by the City of Salem Permit Application Center; we pull the permit and schedule the inspection. Permit and inspection fees are itemized in your written estimate before any work begins.
Do you cover the Lansing and Northgate area too?
Yes. Northeast Salem is adjacent to Lansing, Northgate, Four Corners (adjacent), and we work all of these neighborhoods regularly out of our Salem shop.
How much does a sub-panel cost in Northeast Salem, OR?
Most Northeast Salem-area 60A–100A sub-panels run $1,400–$3,500 installed. Trenching for detached buildings, longer feeders, and larger 125A/200A panels add cost.
Do detached buildings need a separate grounding electrode?
Yes. Per NEC, a sub-panel at a detached structure requires its own grounding electrode system (typically two ground rods) and a 4-wire feeder with isolated neutral and ground. We install both.
Can I add a sub-panel without upgrading my main?
Often yes — we run a load calculation on your main panel first. If there's spare capacity and a breaker slot, a sub-panel is straightforward. If not, we'll quote the main upgrade alongside.
Do sub-panel installs need a permit in Oregon?
Yes. Oregon BCD requires an electrical permit and inspection for any new feeder or panel. We pull the permit and coordinate inspection.
Related Services
Request an Estimate
Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.
Back to homepage · Browse all services · Get a free estimate