Tesla Wall Connector Installation in Keizer, OR
Wire Smart Inc. is a Tesla Wall Connector installer for Keizer, OR — just north of Salem. We pull the Oregon BCD permit, run a dedicated 60A circuit (or sized for your panel), hardwire the Wall Connector, configure power-sharing if you have two units, and coordinate inspection for Keizer Tesla owners and Marion County businesses. In Keizer (97303), most homes and businesses are served by Portland General Electric (PGE) serves nearly all of Keizer. We pull permits through the Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector. and regularly work in Keizer Station, Gubser, McNary, and surrounding Marion County areas.
Quick Answers
Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.
- Who
- Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) serving Keizer and Marion County for 25+ years.
- What
- Hardwired Tesla Wall Connector (Gen 3) installation; Dedicated 60A circuit (48A continuous) for max charge speed; Smaller 40A / 50A circuits when panel capacity is tight; Wall Connector power-sharing for two- and three-unit homes; Load-management devices and panel upgrades when needed; Permit pulling and inspection coordination
- Where
- Keizer, OR (97303) — including Keizer Station, Gubser, McNary — and surrounding Marion County communities.
- How much
- Free estimate. Most Tesla Wall Connector hardwired installs run $900–$2,200; longer runs from the panel, finished-wall fishing, load-management devices, or a panel upgrade add cost.
- When
- Typically scheduled within 3–7 business days for Keizer (about 10–15 minutes from our Salem shop), often sooner for urgent calls during business hours.
What We Do
- Hardwired Tesla Wall Connector (Gen 3) installation
- Dedicated 60A circuit (48A continuous) for max charge speed
- Smaller 40A / 50A circuits when panel capacity is tight
- Wall Connector power-sharing for two- and three-unit homes
- Load-management devices and panel upgrades when needed
- Permit pulling and inspection coordination
Common Reasons Customers Call Us
- New Tesla delivery scheduled for a Keizer home
- Slow Mobile Connector charging on a 120V outlet
- Adding a second Tesla and needing power-sharing
- Workplace or fleet charging at a small business
- Replacing a NEMA 14-50 setup with a hardwired Wall Connector
Our Process
- Step 1Free site visit — panel capacity, run length, mount location.
- Step 2Written estimate covering circuit, permit, and any panel work.
- Step 3Clean install with neat conduit and labeled 60A breaker.
- Step 4Pair to Wi-Fi, test, and coordinate inspection.
Why Work With Wire Smart Inc.
- Local Keizer-area service from a Salem-based contractor — about 10–15 minutes away
- Familiar with Portland General Electric (PGE) serves nearly all of Keizer service standards and Marion County permitting
- Oregon CCB #215974 · BCD #C1787 — licensed and insured
- Permit pulling and inspection coordination
- 25+ years of residential and commercial experience
Serving Keizer, OR
We're roughly 10–15 minutes from our Salem shop to Keizer — close enough for same-week scheduling and prompt service calls. We work regularly around Keizer Station, the McNary area, and along River Road N.
- Electric Utility
- Portland General Electric (PGE) serves nearly all of Keizer.
- Permits & Inspections
- Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector.
- ZIP Codes Served
- 97303
- Neighborhoods & Nearby Areas
- Keizer Station · Gubser · McNary · Clear Lake · Inland Shores
Areas We Serve
We serve Salem, Keizer, Dallas, Monmouth, Independence, Silverton, Stayton, Turner, and surrounding areas in Marion County, Polk County, and the Willamette Valley.
Frequently Asked Questions
Which electric utility serves Keizer, OR?
Portland General Electric (PGE) serves nearly all of Keizer. Knowing the serving utility matters for meter-base work, service upgrades, and any disconnect/reconnect coordination — we handle that scheduling with the utility for you.
Who pulls the electrical permit for Keizer jobs?
Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector. Permit and inspection fees are itemized in your written estimate before any work begins.
Which ZIP codes and neighborhoods do you cover in Keizer?
We serve 97303 and work regularly in Keizer Station, Gubser, McNary, Clear Lake, Inland Shores. Our shop is in Salem — about 10–15 minutes from Keizer — which lets us schedule Keizer jobs the same week in most cases.
How much does Tesla Wall Connector installation cost in Keizer?
Most Keizer-area hardwired Tesla Wall Connector installs land between $900 and $2,200. Longer panel-to-charger runs, finished-wall fishing, load-management devices, and panel upgrades add cost. We give a written estimate before any work.
What size breaker does a Tesla Wall Connector need?
For maximum 48A (11.5 kW) charging, the Wall Connector needs a dedicated 60A breaker on #6 copper. We can configure it for 40A or 50A breakers when panel capacity is tight — the unit lets you select the breaker size during commissioning.
Should I get a Wall Connector or use a NEMA 14-50?
Wall Connector is faster (up to 48A vs 32A) and supports power-sharing, Wi-Fi monitoring, and over-the-air updates. NEMA 14-50 is cheaper if you already own the Mobile Connector and 32A is enough. We'll recommend based on your driving and panel capacity.
Can the Wall Connector charge other EVs?
Yes — Tesla now ships J1772 adapters with new vehicles, and the Wall Connector supports J1772 in some configurations. We'll confirm compatibility for non-Tesla EVs during the site visit.
Related Services
Request an Estimate
Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.
Back to homepage · Browse all services · Get a free estimate