Federal Pacific & Zinsco Panel Replacement in Keizer, OR
Wire Smart Inc. replaces Federal Pacific (FPE) Stab-Lok, Zinsco, Sylvania-Zinsco, and Pushmatic panels in Keizer, OR — just north of Salem. These panels are widely documented to fail to trip under fault conditions — a real fire risk — and most Keizer insurers and home inspectors now flag them. We pull the permit, replace with a modern 200A panel, and coordinate inspection throughout Marion County. In Keizer (97303), most homes and businesses are served by Portland General Electric (PGE) serves nearly all of Keizer. We pull permits through the Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector. and regularly work in Keizer Station, Gubser, McNary, and surrounding Marion County areas.
Quick Answers
Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.
- Who
- Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) serving Keizer and Marion County for 25+ years.
- What
- FPE Stab-Lok panel removal and 200A replacement; Zinsco and Sylvania-Zinsco panel replacement; Pushmatic and other obsolete panel replacements; Meter-base and service-mast replacement when needed; Code-correct grounding electrode and bonding upgrade; Permit pulling, utility coordination, and inspection
- Where
- Keizer, OR (97303) — including Keizer Station, Gubser, McNary — and surrounding Marion County communities.
- How much
- Free estimate. Most FPE / Zinsco replacements with a new 200A panel run $2,800–$5,200 installed depending on meter-base condition, service-mast work, and circuit count; older 60A or split-bus units may need additional grounding and bonding work.
- When
- Typically scheduled within 3–7 business days for Keizer (about 10–15 minutes from our Salem shop), often sooner for urgent calls during business hours.
What We Do
- FPE Stab-Lok panel removal and 200A replacement
- Zinsco and Sylvania-Zinsco panel replacement
- Pushmatic and other obsolete panel replacements
- Meter-base and service-mast replacement when needed
- Code-correct grounding electrode and bonding upgrade
- Permit pulling, utility coordination, and inspection
Common Reasons Customers Call Us
- Insurance carrier flagged the FPE / Zinsco panel in a Keizer home
- Home sale or pre-listing inspection report noted the brand
- Breakers that won't trip when overloaded or shorted
- Burning smell, scorch marks, or rust at the panel
- Adding an EV charger, hot tub, or generator to an obsolete panel
Our Process
- Step 1Free on-site assessment — panel ID, condition, load calc.
- Step 2Written estimate covering panel, breakers, permit, and meter work.
- Step 3Permit pull and utility disconnect/reconnect scheduling.
- Step 4Single-day install with limited power downtime, then inspection.
Why Work With Wire Smart Inc.
- Local Keizer-area service from a Salem-based contractor — about 10–15 minutes away
- Familiar with Portland General Electric (PGE) serves nearly all of Keizer service standards and Marion County permitting
- Oregon CCB #215974 · BCD #C1787 — licensed and insured
- Permit pulling and inspection coordination
- 25+ years of residential and commercial experience
Serving Keizer, OR
We're roughly 10–15 minutes from our Salem shop to Keizer — close enough for same-week scheduling and prompt service calls. We work regularly around Keizer Station, the McNary area, and along River Road N.
- Electric Utility
- Portland General Electric (PGE) serves nearly all of Keizer.
- Permits & Inspections
- Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector.
- ZIP Codes Served
- 97303
- Neighborhoods & Nearby Areas
- Keizer Station · Gubser · McNary · Clear Lake · Inland Shores
Areas We Serve
We serve Salem, Keizer, Dallas, Monmouth, Independence, Silverton, Stayton, Turner, and surrounding areas in Marion County, Polk County, and the Willamette Valley.
Frequently Asked Questions
Which electric utility serves Keizer, OR?
Portland General Electric (PGE) serves nearly all of Keizer. Knowing the serving utility matters for meter-base work, service upgrades, and any disconnect/reconnect coordination — we handle that scheduling with the utility for you.
Who pulls the electrical permit for Keizer jobs?
Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector. Permit and inspection fees are itemized in your written estimate before any work begins.
Which ZIP codes and neighborhoods do you cover in Keizer?
We serve 97303 and work regularly in Keizer Station, Gubser, McNary, Clear Lake, Inland Shores. Our shop is in Salem — about 10–15 minutes from Keizer — which lets us schedule Keizer jobs the same week in most cases.
How do I know if I have a Federal Pacific or Zinsco panel in Keizer?
FPE panels say "Federal Pacific" or "Stab-Lok" on the deadfront; breakers usually have a thin red stripe on the handle. Zinsco panels often say "Zinsco" or "Sylvania-Zinsco" with colorful (red, blue, green) breaker handles. Send us a photo and we'll confirm.
Why are FPE and Zinsco panels dangerous?
Multiple independent investigations and class-action settlements have documented that FPE Stab-Lok and Zinsco breakers fail to trip under overload or short-circuit conditions at significantly higher rates than modern breakers — meaning the panel can let a fault burn rather than shut it off.
How much does FPE / Zinsco replacement cost in Keizer?
Most Keizer-area FPE / Zinsco replacements with a new 200A panel run $2,800–$5,200 installed. Meter-base or mast replacement, longer service runs, and additional grounding work add cost. Free written estimate after a site visit.
Will my homeowners insurance require replacement?
Many Oregon insurers either won't write a new policy or will non-renew until FPE / Zinsco is replaced. If your carrier flagged the panel, send us their letter and we'll size and quote a replacement that satisfies the underwriter.
Related Services
Request an Estimate
Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.
Back to homepage · Browse all services · Get a free estimate