Federal Pacific & Zinsco Panel Replacement in Northeast Salem, Salem, OR
Wire Smart Inc. provides federal pacific (fpe) and zinsco panel replacement for Northeast Salem, one of Salem's established neighborhoods. We work along Lancaster Dr NE, Silverton Rd NE, Sunnyview Rd, and into the Lansing neighborhood. In Northeast Salem (97301, 97305), most properties are served by Portland General Electric (PGE) is the primary utility for Northeast Salem. Inside Salem city limits, electrical permits are issued by the City of Salem Permit Application Center; we pull the permit and schedule the inspection.
Quick Answers
Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.
- Who
- Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) — local to Northeast Salem for 25+ years.
- What
- FPE Stab-Lok panel removal and 200A replacement; Zinsco and Sylvania-Zinsco panel replacement; Pushmatic and other obsolete panel replacements; Meter-base and service-mast replacement when needed; Code-correct grounding electrode and bonding upgrade; Permit pulling, utility coordination, and inspection
- Where
- Northeast Salem, Salem OR (97301, 97305) — including Lansing, Northgate, Four Corners (adjacent).
- How much
- Free estimate. Most FPE / Zinsco replacements with a new 200A panel run $2,800–$5,200 installed depending on meter-base condition, service-mast work, and circuit count; older 60A or split-bus units may need additional grounding and bonding work.
- When
- Most Salem neighborhood jobs are scheduled within 3–5 business days; same-day for urgent calls during business hours.
What We Do
- FPE Stab-Lok panel removal and 200A replacement
- Zinsco and Sylvania-Zinsco panel replacement
- Pushmatic and other obsolete panel replacements
- Meter-base and service-mast replacement when needed
- Code-correct grounding electrode and bonding upgrade
- Permit pulling, utility coordination, and inspection
Common Reasons Customers Call Us
- Insurance carrier flagged the FPE / Zinsco panel in a Northeast Salem home
- Home sale or pre-listing inspection report noted the brand
- Breakers that won't trip when overloaded or shorted
- Burning smell, scorch marks, or rust at the panel
- Adding an EV charger, hot tub, or generator to an obsolete panel
Our Process
- Step 1Free on-site assessment — panel ID, condition, load calc.
- Step 2Written estimate covering panel, breakers, permit, and meter work.
- Step 3Permit pull and utility disconnect/reconnect scheduling.
- Step 4Single-day install with limited power downtime, then inspection.
Why Work With Wire Smart Inc.
- Local Northeast Salem (Salem) service from a Salem-based contractor
- Familiar with Portland General Electric (PGE) is the primary utility for Northeast Salem service standards and City of Salem permitting
- Oregon CCB #215974 · BCD #C1787 — licensed and insured
- Permit pulling and City of Salem inspection coordination
- 25+ years of residential and commercial experience in Salem
Serving Northeast Salem, Salem, OR
We're roughly 10–20 minutes from our Salem shop to Northeast Salem, Salem — close enough for same-week scheduling and prompt service calls. We work along Lancaster Dr NE, Silverton Rd NE, Sunnyview Rd, and into the Lansing neighborhood.
- Electric Utility
- Portland General Electric (PGE) is the primary utility for Northeast Salem.
- Permits & Inspections
- Inside Salem city limits, electrical permits are issued by the City of Salem Permit Application Center; we pull the permit and schedule the inspection.
- ZIP Codes Served
- 97301, 97305
- Neighborhoods & Nearby Areas
- Lansing · Northgate · Four Corners (adjacent)
Areas We Serve
We serve Salem, Keizer, Dallas, Monmouth, Independence, Silverton, Stayton, Turner, and surrounding areas in Marion County, Polk County, and the Willamette Valley.
Frequently Asked Questions
Which electric utility serves Northeast Salem in Salem?
Portland General Electric (PGE) is the primary utility for Northeast Salem. Knowing the serving utility matters for meter-base work, service upgrades, and any disconnect/reconnect — we coordinate that with the utility for you.
Who issues electrical permits for Northeast Salem?
Inside Salem city limits, electrical permits are issued by the City of Salem Permit Application Center; we pull the permit and schedule the inspection. Permit and inspection fees are itemized in your written estimate before any work begins.
Do you cover the Lansing and Northgate area too?
Yes. Northeast Salem is adjacent to Lansing, Northgate, Four Corners (adjacent), and we work all of these neighborhoods regularly out of our Salem shop.
How do I know if I have a Federal Pacific or Zinsco panel in Northeast Salem?
FPE panels say "Federal Pacific" or "Stab-Lok" on the deadfront; breakers usually have a thin red stripe on the handle. Zinsco panels often say "Zinsco" or "Sylvania-Zinsco" with colorful (red, blue, green) breaker handles. Send us a photo and we'll confirm.
Why are FPE and Zinsco panels dangerous?
Multiple independent investigations and class-action settlements have documented that FPE Stab-Lok and Zinsco breakers fail to trip under overload or short-circuit conditions at significantly higher rates than modern breakers — meaning the panel can let a fault burn rather than shut it off.
How much does FPE / Zinsco replacement cost in Northeast Salem?
Most Northeast Salem-area FPE / Zinsco replacements with a new 200A panel run $2,800–$5,200 installed. Meter-base or mast replacement, longer service runs, and additional grounding work add cost. Free written estimate after a site visit.
Will my homeowners insurance require replacement?
Many Oregon insurers either won't write a new policy or will non-renew until FPE / Zinsco is replaced. If your carrier flagged the panel, send us their letter and we'll size and quote a replacement that satisfies the underwriter.
Related Services
Request an Estimate
Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.
Back to homepage · Browse all services · Get a free estimate