Skip to main content
Wire Smart Inc.

Generator Wiring in Four Corners, Salem, OR

Wire Smart Inc. provides generator wiring & transfer switches for Four Corners, one of Salem's established neighborhoods. We're often at the Lancaster / State St intersection and along Macleay Rd SE. In Four Corners (97301, 97317), most properties are served by Portland General Electric (PGE) serves the Four Corners area east of Salem. Inside Salem city limits, electrical permits are issued by the City of Salem Permit Application Center; we pull the permit and schedule the inspection.

Call 503-383-1602Request an EstimateView Services
Standby generator installed beside a Four Corners, Salem, Oregon home with a transfer switch panel

Quick Answers

Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.

Who
Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) — local to Four Corners for 25+ years.
What
Manual transfer switch + inlet box for portable generators; Automatic transfer switch (ATS) for standby generators; Generator-ready panel upgrades; Load-center integration and circuit selection; Permit pulling and inspection; Whole-home and partial-load backup configurations
Where
Four Corners, Salem OR (97301, 97317) — including Lansing, Macleay, Hayesville (adjacent).
How much
Free estimate. Manual transfer switch + inlet box installs typically run $900–$1,800; automatic transfer switches for standby generators are bid by load and runs.
When
Most Salem neighborhood jobs are scheduled within 3–5 business days; same-day for urgent calls during business hours.

What We Do

  • Manual transfer switch + inlet box for portable generators
  • Automatic transfer switch (ATS) for standby generators
  • Generator-ready panel upgrades
  • Load-center integration and circuit selection
  • Permit pulling and inspection
  • Whole-home and partial-load backup configurations

Common Reasons Customers Call Us

  • Power outages in Four Corners during winter wind/ice storms
  • New standby (Generac, Kohler, Cummins) installation
  • Existing portable generator with unsafe extension cord setup
  • Medical equipment requiring uninterrupted power
  • Home office or food storage protection

Our Process

  1. Step 1
    On-site assessment — generator size, circuit priorities, location.
  2. Step 2
    Estimate covering transfer switch, inlet, conduit, and permit.
  3. Step 3
    Installation and code-compliant grounding.
  4. Step 4
    Test-firing and inspection coordination.

Why Work With Wire Smart Inc.

  • Local Four Corners (Salem) service from a Salem-based contractor
  • Familiar with Portland General Electric (PGE) serves the Four Corners area east of Salem service standards and City of Salem permitting
  • Oregon CCB #215974 · BCD #C1787 — licensed and insured
  • Permit pulling and City of Salem inspection coordination
  • 25+ years of residential and commercial experience in Salem

Serving Four Corners, Salem, OR

We're roughly 10–20 minutes from our Salem shop to Four Corners, Salem — close enough for same-week scheduling and prompt service calls. We're often at the Lancaster / State St intersection and along Macleay Rd SE.

Electric Utility
Portland General Electric (PGE) serves the Four Corners area east of Salem.
Permits & Inspections
Inside Salem city limits, electrical permits are issued by the City of Salem Permit Application Center; we pull the permit and schedule the inspection.
ZIP Codes Served
97301, 97317
Neighborhoods & Nearby Areas
Lansing · Macleay · Hayesville (adjacent)

Get Generator Wiring & Transfer Switches in Your Area

Wire Smart Inc. offers generator wiring & transfer switches across the Salem metro and Willamette Valley. Pick the closest area below for local utility, permit, and ZIP-specific details.

Frequently Asked Questions

Which electric utility serves Four Corners in Salem?

Portland General Electric (PGE) serves the Four Corners area east of Salem. Knowing the serving utility matters for meter-base work, service upgrades, and any disconnect/reconnect — we coordinate that with the utility for you.

Who issues electrical permits for Four Corners?

Inside Salem city limits, electrical permits are issued by the City of Salem Permit Application Center; we pull the permit and schedule the inspection. Permit and inspection fees are itemized in your written estimate before any work begins.

Do you cover the Lansing and Macleay area too?

Yes. Four Corners is adjacent to Lansing, Macleay, Hayesville (adjacent), and we work all of these neighborhoods regularly out of our Salem shop.

Can you wire a generator at a home in Four Corners, OR?

Yes. We install transfer switches, inlet boxes, and standby generator wiring throughout Four Corners and the surrounding area.

Manual vs automatic transfer switch — which do I need?

Manual switches are typical for portable generators ($900–$1,800 installed). Automatic transfer switches pair with permanent standby generators and start the generator automatically when utility power fails.

Do generator installs need a permit?

Yes. Oregon BCD requires an electrical permit for transfer-switch and standby-generator wiring. We handle permitting and inspection.

Will you work with my generator brand?

Yes. We work with Generac, Kohler, Cummins, Briggs, and most portable brands.

Related Services

Request an Estimate

Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.

Call 503-383-1602Request an EstimateView Services

Home · All Services · Contact