Skip to main content
Wire Smart Inc.

Generator Wiring in Keizer, OR

Wire Smart Inc. installs generator wiring for Keizer, OR — just north of Salem. We wire standby and portable generators, install manual and automatic transfer switches, and add inlet boxes for Keizer homes and Marion County businesses that need reliable backup power during Willamette Valley winter outages. In Keizer (97303), most homes and businesses are served by Portland General Electric (PGE) serves nearly all of Keizer. We pull permits through the Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector. and regularly work in Keizer Station, Gubser, McNary, and surrounding Marion County areas.

Call 503-383-1602Request an EstimateView Services
Standby generator installed beside a Keizer, Oregon home with a transfer switch panel

Quick Answers

Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.

Who
Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) serving Keizer and Marion County for 25+ years.
What
Manual transfer switch + inlet box for portable generators; Automatic transfer switch (ATS) for standby generators; Generator-ready panel upgrades; Load-center integration and circuit selection; Permit pulling and inspection; Whole-home and partial-load backup configurations
Where
Keizer, OR (97303) — including Keizer Station, Gubser, McNary — and surrounding Marion County communities.
How much
Free estimate. Manual transfer switch + inlet box installs typically run $900–$1,800; automatic transfer switches for standby generators are bid by load and runs.
When
Typically scheduled within 3–7 business days for Keizer (about 10–15 minutes from our Salem shop), often sooner for urgent calls during business hours.

What We Do

  • Manual transfer switch + inlet box for portable generators
  • Automatic transfer switch (ATS) for standby generators
  • Generator-ready panel upgrades
  • Load-center integration and circuit selection
  • Permit pulling and inspection
  • Whole-home and partial-load backup configurations

Common Reasons Customers Call Us

  • Power outages in Keizer during winter wind/ice storms
  • New standby (Generac, Kohler, Cummins) installation
  • Existing portable generator with unsafe extension cord setup
  • Medical equipment requiring uninterrupted power
  • Home office or food storage protection

Our Process

  1. Step 1
    On-site assessment — generator size, circuit priorities, location.
  2. Step 2
    Estimate covering transfer switch, inlet, conduit, and permit.
  3. Step 3
    Installation and code-compliant grounding.
  4. Step 4
    Test-firing and inspection coordination.

Why Work With Wire Smart Inc.

  • Local Keizer-area service from a Salem-based contractor — about 10–15 minutes away
  • Familiar with Portland General Electric (PGE) serves nearly all of Keizer service standards and Marion County permitting
  • Oregon CCB #215974 · BCD #C1787 — licensed and insured
  • Permit pulling and inspection coordination
  • 25+ years of residential and commercial experience

Serving Keizer, OR

We're roughly 10–15 minutes from our Salem shop to Keizer — close enough for same-week scheduling and prompt service calls. We work regularly around Keizer Station, the McNary area, and along River Road N.

Electric Utility
Portland General Electric (PGE) serves nearly all of Keizer.
Permits & Inspections
Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector.
ZIP Codes Served
97303
Neighborhoods & Nearby Areas
Keizer Station · Gubser · McNary · Clear Lake · Inland Shores

Get Generator Wiring & Transfer Switches in Your Area

Wire Smart Inc. offers generator wiring & transfer switches across the Salem metro and Willamette Valley. Pick the closest area below for local utility, permit, and ZIP-specific details.

Frequently Asked Questions

Which electric utility serves Keizer, OR?

Portland General Electric (PGE) serves nearly all of Keizer. Knowing the serving utility matters for meter-base work, service upgrades, and any disconnect/reconnect coordination — we handle that scheduling with the utility for you.

Who pulls the electrical permit for Keizer jobs?

Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector. Permit and inspection fees are itemized in your written estimate before any work begins.

Which ZIP codes and neighborhoods do you cover in Keizer?

We serve 97303 and work regularly in Keizer Station, Gubser, McNary, Clear Lake, Inland Shores. Our shop is in Salem — about 10–15 minutes from Keizer — which lets us schedule Keizer jobs the same week in most cases.

Can you wire a generator at a home in Keizer, OR?

Yes. We install transfer switches, inlet boxes, and standby generator wiring throughout Keizer and the surrounding area.

Manual vs automatic transfer switch — which do I need?

Manual switches are typical for portable generators ($900–$1,800 installed). Automatic transfer switches pair with permanent standby generators and start the generator automatically when utility power fails.

Do generator installs need a permit?

Yes. Oregon BCD requires an electrical permit for transfer-switch and standby-generator wiring. We handle permitting and inspection.

Will you work with my generator brand?

Yes. We work with Generac, Kohler, Cummins, Briggs, and most portable brands.

Related Services

Customers who book generator wiring & transfer switches often need these adjacent services on the same job.

Request an Estimate

Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.

Call 503-383-1602Request an EstimateView Services

Back to homepage · Browse all services · Get a free estimate