Skip to main content
Wire Smart Inc.

Lighting Installation in Keizer, OR

Wire Smart Inc. installs interior, exterior, and landscape lighting in Keizer, OR — just north of Salem. Recessed LED cans, under-cabinet, pendants, dimmers, smart switches, soffit and security lighting, and full landscape low-voltage runs for Keizer homes and Marion County businesses. In Keizer (97303), most homes and businesses are served by Portland General Electric (PGE) serves nearly all of Keizer. We pull permits through the Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector. and regularly work in Keizer Station, Gubser, McNary, and surrounding Marion County areas.

Call 503-383-1602Request an EstimateView Services
Warm recessed LED lighting installed in a remodeled Keizer, Oregon kitchen with under-cabinet accent lighting

Quick Answers

Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.

Who
Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) serving Keizer and Marion County for 25+ years.
What
Recessed LED can lighting (new and retrofit); Under-cabinet, pendant, and chandelier installs; Dimmers, smart switches, and 3-way conversions; Exterior soffit, flood, and security lighting; Low-voltage landscape lighting and transformers; Lighting design for kitchens, baths, and great rooms
Where
Keizer, OR (97303) — including Keizer Station, Gubser, McNary — and surrounding Marion County communities.
How much
Free estimate. Most recessed-can retrofits run roughly $125–$200 per fixture installed; new circuits, fishing finished walls, and landscape transformers are quoted by scope.
When
Typically scheduled within 3–7 business days for Keizer (about 10–15 minutes from our Salem shop), often sooner for urgent calls during business hours.

What We Do

  • Recessed LED can lighting (new and retrofit)
  • Under-cabinet, pendant, and chandelier installs
  • Dimmers, smart switches, and 3-way conversions
  • Exterior soffit, flood, and security lighting
  • Low-voltage landscape lighting and transformers
  • Lighting design for kitchens, baths, and great rooms

Common Reasons Customers Call Us

  • Dim or dated lighting in a Keizer kitchen or great room
  • Kitchen / bath remodel needing new fixtures
  • Dark exterior — adding security and entry lighting
  • Landscape lighting for paths, trees, and patios
  • Switching old halogen to long-life LED

Our Process

  1. Step 1
    Walk-through — fixture plan, switching, and dimmer choices.
  2. Step 2
    Written estimate by fixture count and circuit work.
  3. Step 3
    Clean install with minimal drywall impact.
  4. Step 4
    Aim, dim, and walk-through when complete.

Why Work With Wire Smart Inc.

  • Local Keizer-area service from a Salem-based contractor — about 10–15 minutes away
  • Familiar with Portland General Electric (PGE) serves nearly all of Keizer service standards and Marion County permitting
  • Oregon CCB #215974 · BCD #C1787 — licensed and insured
  • Permit pulling and inspection coordination
  • 25+ years of residential and commercial experience

Serving Keizer, OR

We're roughly 10–15 minutes from our Salem shop to Keizer — close enough for same-week scheduling and prompt service calls. We work regularly around Keizer Station, the McNary area, and along River Road N.

Electric Utility
Portland General Electric (PGE) serves nearly all of Keizer.
Permits & Inspections
Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector.
ZIP Codes Served
97303
Neighborhoods & Nearby Areas
Keizer Station · Gubser · McNary · Clear Lake · Inland Shores

Get Lighting Installation in Your Area

Wire Smart Inc. offers lighting installation across the Salem metro and Willamette Valley. Pick the closest area below for local utility, permit, and ZIP-specific details.

Frequently Asked Questions

Which electric utility serves Keizer, OR?

Portland General Electric (PGE) serves nearly all of Keizer. Knowing the serving utility matters for meter-base work, service upgrades, and any disconnect/reconnect coordination — we handle that scheduling with the utility for you.

Who pulls the electrical permit for Keizer jobs?

Oregon Building Codes Division (BCD) handles electrical permits and inspections for Keizer; we pull the permit and schedule the state inspector. Permit and inspection fees are itemized in your written estimate before any work begins.

Which ZIP codes and neighborhoods do you cover in Keizer?

We serve 97303 and work regularly in Keizer Station, Gubser, McNary, Clear Lake, Inland Shores. Our shop is in Salem — about 10–15 minutes from Keizer — which lets us schedule Keizer jobs the same week in most cases.

How much does recessed lighting cost per can in Keizer?

Keizer-area retrofit LED cans typically run $125–$200 installed per fixture. New circuits, attic access, and fishing finished walls without an attic add cost.

Can you add dimmers and smart switches?

Yes. We install Lutron Caséta, Leviton Decora Smart, and standard 0–10V or ELV dimmers matched to your LED fixtures so they actually dim smoothly without flicker.

Do you install landscape lighting?

Yes. Path, tree, and architectural low-voltage landscape lighting with properly sized transformers and direct-burial wire — installed to last.

Will adding lighting need a permit?

Replacing a fixture on an existing circuit usually does not. New circuits, exterior lighting circuits, and additions/remodels do — we handle permits when required.

Related Services

Request an Estimate

Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.

Call 503-383-1602Request an EstimateView Services

Home · All Services · Contact