Bathroom Remodel Electrician in Salem, OR
Wire Smart Inc. wires bathroom remodels across Salem, Marion County, Polk County, and the Willamette Valley. We rough-in and trim out GFCI-protected outlets, dedicated bath circuits, exhaust fan and combo fan/heater/light units, vanity sconces, wet-rated shower recessed lighting, and heated floor controls — all to the current Oregon Electrical Specialty Code. Licensed (Oregon CCB #215974, BCD #C1787), permitted, and inspected.
Quick Answers
Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.
- Who
- Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) experienced with bath remodels alongside Salem-area GCs and homeowners.
- What
- 20A bathroom branch circuits, GFCI/AFCI protection, exhaust fan / fan-heater-light combo wiring, vanity & sconce lighting, wet-rated recessed lighting, heated-floor wiring & thermostats, mirror-defogger outlets.
- Where
- Bathrooms in Salem, Keizer, Dallas, Monmouth, Independence, Silverton, Stayton, and surrounding Marion & Polk County homes.
- How much
- Free on-site estimate. Most Salem bath remodel electrical scopes run $850–$2,800 depending on fixture count, heated floor, and whether walls are open or closed.
- When
- Rough-in typically scheduled around the GC's framing/insulation; trim-out after tile and drywall. Most jobs scheduled within 1–2 weeks.
What We Do
- Dedicated 20A GFCI bathroom branch circuits
- Exhaust fan and combo fan/heater/light wiring
- Vanity sconces, mirror lights, and over-vanity recessed cans
- Wet-rated shower recessed lighting
- Heated tile floor wiring and thermostat
- AFCI protection where required by Oregon OESC
- Permit pulling and final inspection coordination
Common Reasons Customers Call Us
- Full bathroom remodel or addition
- Adding a fan/heater combo for a cold Salem winter bathroom
- Installing heated tile floors
- Old 2-prong outlets need GFCI upgrade
- Master bath build-out with double vanity & shower lighting
Our Process
- Step 1Walk-through with the homeowner or GC — confirm fixture list and circuit plan.
- Step 2Written estimate covering rough-in, trim-out, fixtures, and permit.
- Step 3Rough-in wiring while walls are open; coordinate with tile/drywall.
- Step 4Trim-out, test GFCIs, and coordinate the Oregon BCD inspection.
Why Work With Wire Smart Inc.
- Familiar with current Oregon Electrical Specialty Code bath requirements
- Coordinate cleanly with tile, drywall, and plumbing trades
- Oregon CCB #215974 · BCD #C1787 — licensed and insured
- Permit and inspection handled for you
Areas We Serve
We serve Salem, Keizer, Dallas, Monmouth, Independence, Silverton, Stayton, Turner, and surrounding areas in Marion County, Polk County, and the Willamette Valley.
Frequently Asked Questions
How much does bathroom remodel electrical cost in Salem?
Most Salem bathroom remodel electrical scopes run $850–$2,800. A simple vanity-and-fan refresh sits at the low end; a full master bath with heated floors, double vanity, and shower lighting sits at the high end.
Do I need a permit to rewire a bathroom in Salem?
Yes — any new circuits, fan/heater wiring, or remodel wiring requires an Oregon BCD electrical permit and a final inspection. We pull the permit and coordinate inspection.
Does a bathroom need a dedicated 20A circuit?
Yes. Oregon code requires at least one dedicated 20A circuit for bathroom receptacles, GFCI-protected, and exhaust fans / fan-heater combos are typically on their own circuit.
Can you wire heated floors?
Yes. We rough-in the heating mat power, install the GFCI thermostat, and coordinate with your tile installer on placement and protection during the tile job.
Will my old bathroom outlets pass inspection after a remodel?
Receptacles in the bathroom area must be GFCI-protected and on a 20A circuit. We replace 2-prong or ungrounded outlets and add GFCI/AFCI protection as part of the remodel.
Related Services
Request an Estimate
Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.
Back to homepage · Browse all services · Get a free estimate