Skip to main content
Wire Smart Inc.

Whole-House Surge Protection in Salem, OR

Wire Smart Inc. installs whole-house surge protective devices (Type 2 SPDs) at the main panel in Salem, OR homes and businesses. A panel-mounted SPD clamps utility-side surges and lightning-induced transients before they reach your HVAC system, EV charger, well pump, induction range, smart-home gear, and electronics. New 2020+ NEC service installs already require one — older Salem homes usually don't have one yet.

Call 503-383-1602Request an EstimateView Services
Type 2 whole-house surge protector mounted at the main panel of a Salem, Oregon home

Quick Answers

Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.

Who
Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787).
What
Type 2 whole-house surge protective device (SPD) installed at the main panel — typically a Square D, Eaton, Siemens, or Leviton unit with status LEDs and a manufacturer warranty.
Where
Salem, Keizer, Dallas, Monmouth, Independence, Silverton, Stayton, and surrounding Marion and Polk County communities.
How much
Free estimate. Most Salem-area whole-house SPD installs run $325–$650 installed, including the device and a dedicated breaker.
When
Usually scheduled within 3–7 business days; the install itself is typically under 90 minutes.

What We Do

  • Type 2 whole-house SPD install at the main panel
  • Dedicated breaker for the SPD with short, low-impedance leads
  • Brand and rating matched to your panel (Square D, Eaton, Siemens, Leviton)
  • Optional Type 1 service-entrance SPD for high-exposure properties
  • Point-of-use surge protection for sensitive AV / IT gear
  • Permit and inspection when required (typically for panel work)

Common Reasons Customers Call Us

  • Protect HVAC, EV charger, induction range, and well pump
  • Salem-area utility switching transients and storm-related surges
  • Newer smart-home gear, LED drivers, and electronics are surge-sensitive
  • Insurance discount or recommendation for an SPD
  • Older panel without any whole-house surge protection

Our Process

  1. Step 1
    Confirm panel make / model and a clear breaker location near the main.
  2. Step 2
    Written estimate including device, breaker, and labor.
  3. Step 3
    Install the SPD with short leads, verify status LEDs, label the breaker.
  4. Step 4
    Walk-through and review of what's now protected.

Why Work With Wire Smart Inc.

  • Salem-based licensed electricians familiar with PGE and Salem Electric service
  • Devices matched to your panel brand for the cleanest install
  • Oregon CCB #215974 · BCD #C1787 — licensed and insured
  • Short, low-impedance leads — installed the way the manufacturer specifies

Get Whole-House Surge Protection in Your Area

Wire Smart Inc. offers whole-house surge protection across the Salem metro and Willamette Valley. Pick the closest area below for local utility, permit, and ZIP-specific details.

Frequently Asked Questions

How much does a whole-house surge protector cost in Salem?

Most Salem-area installs run $325–$650 installed, including the SPD device and a dedicated breaker. High-end Type 1 service-entrance SPDs cost more.

Will a whole-house surge protector stop lightning?

It dramatically reduces the energy that reaches your circuits from utility-side surges and lightning-induced transients on the grid. A direct lightning strike on the house can still cause damage — for that, a layered approach (Type 1 + Type 2 + point-of-use) is best.

Do I still need power strip surge protectors?

Yes — for the most sensitive AV / IT gear, a point-of-use surge strip adds a second layer after the panel-mounted SPD. This is the standard 'cascade' approach.

Does my panel need to be upgraded first?

Not usually. Most modern panels have room for a 2-pole breaker and the SPD itself. We confirm during the estimate.

Related Services

Customers who book whole-house surge protection often need these adjacent services on the same job.

Request an Estimate

Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.

Call 503-383-1602Request an EstimateView Services

Back to homepage · Browse all services · Get a free estimate