Recessed Lighting Installation in Dallas, OR
Wire Smart Inc. installs recessed LED can lighting in Dallas, OR — west of Salem in Polk County. Retrofit downlights into existing ceilings, new-construction housings during remodels, IC-rated airtight units for insulated ceilings, and matched dimmers for smooth flicker-free dimming throughout Dallas homes and Polk County additions. In Dallas (97338), most homes and businesses are served by Pacific Power (PacifiCorp) serves the City of Dallas and most of Polk County. We pull permits through the Polk County (acting for the state) handles electrical permits and inspections in the Dallas area; we pull the permit and coordinate the inspection. and regularly work in Downtown Dallas, Oakdale Heights, LaCreole, and surrounding Polk County areas.
Quick Answers
Direct answers for Salem, Marion County, Polk County, and the Willamette Valley.
- Who
- Wire Smart Inc., a Salem-based licensed electrical contractor (Oregon CCB #215974, BCD #C1787) serving Dallas and Polk County for 25+ years.
- What
- Retrofit LED downlights into existing ceilings; New-construction IC-rated airtight housings; 4", 5", and 6" trims with adjustable color temperature; Wet-rated cans for showers, soffits, and exterior eaves; Lutron Caséta and Leviton Decora dimmers matched to fixtures; Layout design for kitchens, baths, great rooms, and hallways
- Where
- Dallas, OR (97338) — including Downtown Dallas, Oakdale Heights, LaCreole — and surrounding Polk County communities.
- How much
- Free estimate. Most retrofit LED cans run $125–$200 per fixture installed; new-construction housings, attic access, and fishing finished walls without an attic add cost.
- When
- Typically scheduled within 3–7 business days for Dallas (about 20–25 minutes from our Salem shop), often sooner for urgent calls during business hours.
What We Do
- Retrofit LED downlights into existing ceilings
- New-construction IC-rated airtight housings
- 4", 5", and 6" trims with adjustable color temperature
- Wet-rated cans for showers, soffits, and exterior eaves
- Lutron Caséta and Leviton Decora dimmers matched to fixtures
- Layout design for kitchens, baths, great rooms, and hallways
Common Reasons Customers Call Us
- Dim or dated lighting in a Dallas kitchen, great room, or basement
- Kitchen or bath remodel needing a fresh lighting plan
- Switching from old halogen / fluorescent to long-life LED
- Adding accent lighting over an island, hood, or dining area
- Replacing yellowed plastic dome fixtures throughout the house
Our Process
- Step 1Walk-through — layout, fixture spacing, dimmer choices.
- Step 2Written estimate by can count and any circuit work.
- Step 3Clean install with minimal drywall impact.
- Step 4Aim, dim, and walk-through when complete.
Why Work With Wire Smart Inc.
- Local Dallas-area service from a Salem-based contractor — about 20–25 minutes away
- Familiar with Pacific Power (PacifiCorp) serves the City of Dallas and most of Polk County service standards and Polk County permitting
- Oregon CCB #215974 · BCD #C1787 — licensed and insured
- Permit pulling and inspection coordination
- 25+ years of residential and commercial experience
Serving Dallas, OR
We're roughly 20–25 minutes from our Salem shop to Dallas — close enough for same-week scheduling and prompt service calls. We're frequently in Dallas around the Polk County Courthouse and along E Ellendale Ave / Hwy 223.
- Electric Utility
- Pacific Power (PacifiCorp) serves the City of Dallas and most of Polk County.
- Permits & Inspections
- Polk County (acting for the state) handles electrical permits and inspections in the Dallas area; we pull the permit and coordinate the inspection.
- ZIP Codes Served
- 97338
- Neighborhoods & Nearby Areas
- Downtown Dallas · Oakdale Heights · LaCreole · Roger Jordan area · Kings Valley Hwy corridor
Areas We Serve
We serve Salem, Keizer, Dallas, Monmouth, Independence, Silverton, Stayton, Turner, and surrounding areas in Marion County, Polk County, and the Willamette Valley.
Frequently Asked Questions
Which electric utility serves Dallas, OR?
Pacific Power (PacifiCorp) serves the City of Dallas and most of Polk County. Knowing the serving utility matters for meter-base work, service upgrades, and any disconnect/reconnect coordination — we handle that scheduling with the utility for you.
Who pulls the electrical permit for Dallas jobs?
Polk County (acting for the state) handles electrical permits and inspections in the Dallas area; we pull the permit and coordinate the inspection. Permit and inspection fees are itemized in your written estimate before any work begins.
Which ZIP codes and neighborhoods do you cover in Dallas?
We serve 97338 and work regularly in Downtown Dallas, Oakdale Heights, LaCreole, Roger Jordan area, Kings Valley Hwy corridor. Our shop is in Salem — about 20–25 minutes from Dallas — which lets us schedule Dallas jobs the same week in most cases.
How much does recessed lighting cost per can in Dallas?
Dallas-area retrofit LED cans typically run $125–$200 installed per fixture. New circuits, fishing finished walls without attic access, and wet-rated trims for showers or exteriors add cost.
Can you retrofit cans without tearing up the ceiling?
Yes — modern slim retrofit LED downlights install through a small hole and clip into the drywall. No housing required, and minimal patch work. They're our go-to for finished ceilings.
Why do my LED cans flicker when dimmed?
Almost always a mismatch between the dimmer and the LED driver. We pair Lutron Caséta or matched 0–10V / ELV dimmers to your specific fixtures so they dim smoothly from 100% down to roughly 1% with no flicker.
How many cans do I need in a kitchen?
Rule of thumb is one 4"–6" can per 16–25 sq ft of ceiling for general lighting, plus dedicated cans over the island, sink, and prep zones. We sketch a layout during the walk-through.
Related Services
Request an Estimate
Call Wire Smart Inc. at 503-383-1602 or send us a message. We respond quickly to homes and businesses across the Salem area.
Back to homepage · Browse all services · Get a free estimate